Kepez Plaster Primer
Gypsum-based construction material used for plastering before wall and ceiling coloring and pasting of wallpapers.
About the material
Kepez Plaster Primer is a gypsum-based surface plaster with heat and sound insulation properties. The rules of preparation and use are simple. The initial freezing time of 70-90 minutes allows the plaster to be easily applied. It does not drain if it is properly prepared and applied. It fills cavities in places where it is applied, removes dirtiness and defects on the wall surface, prevents the formation of mushrooms and molds caused by regulation of moisture content in the spaces. It is resistant to rain. Human and environment friend.
Application areas
In interior space, walls and ceilings in offices, villas, hospitals, hotels, recreation and residential complexes
Monolithic cement and smooth surfaces inside the building
Directly on bricks and cubic stone, on concrete surfaces
Advantages
It has high resistance
Easily polished, gives a smooth surface effect without almost polishing
Paint and wallpaper work is easily carried out
It regulates the moisture balance of the walls, resulting in the wall breathing
It does not crack, it does not contribute to the spread of bacteria
Protects heat and creates sound insulation
Because it contains water, it has a fire retardant feature, fire resistant.
Surface Preparation
The lowest air temperature that can be used is + 5 ° C. The applied area should be cleaned of various contaminants (dust, lubricating stains, old paint). It is recommended that the wall or ceiling surface be moistened in conditions of high air temperature, airborne dirt, and excessive drying of the surface.
Mixing
1 kg of dry mixture is dissolved in 0.60 liters of pure water. The resulting solution should be sprinkled with water until complete ingredient is to be expected, and the water should dip into the dry mixture for 2-3 minutes. Then the solution should be mixed and ready until it is homogeneous with mechanical or manual methods
Storage conditions
It is advisable to store the plastering materials in tightly-sealed containers at dry temperatures above 0 ° C.
Technical features
Physical appearance – White powder
Plaster / water ratio: 100 g of plaster / 60 g of water
Duration of use: 70-90 minutes
Freezing time: 160-220 minutes
Quantity used: 1 cm thick 8.5-10 kg / m
Pressure resistance:> 2 N / mm2 (7 days later)
Torsion resistance:> 1 N / mm2 (7 days later)
Volume weight: 700-900 gr / lt
PH: 13-14
Surface hardness: 40 shore D