skip to Main Content

Feniks Facade Emulsion

Phoenix Facade Emulsion

It is acrylic copolymer based, non-cracking and non-slipping, matte, odorless, high quality, decorative last layer exterior wall paint.

Usage Areas

This paint is used on concrete, gypsum, brick and other old and new surfaces on the outside of buildings.


Phoenix facade paint is all kinds of surfaces with high adhesion capability, high-gloss, non-cracked and non-slippery, odorless, without leaving traces of brush and roller, environmentally friendly, flow resistant decorative last layer exterior wall paint. It has a high degree of coverability and allows the dampness of the wall to come out with its respiration. It prevents the surface from sinking and shedding in humid environments with a silicone structure. Resistant to rain, moisture and sun rays. It is resistant to the negative effects of salty water in buildings on the seafront.

Terms of use

Before application, the surface should be cleaned from dust, dirt and grease, the edges should be completely leveled and the surface should be dry. New plastered surfaces should be waited 4 weeks before painting. First, the cracks are filled. concrete, gypsum, brick and other old and new surfaces should be cleaned from dust and dirt. In the first layer, 20 to 25% and in the second layer up to 10-15% of the paint should be thoroughly touched with water, and should be brought to the surface with brush or roller. Temperature should be +5 C with +30 C and humidity should not be below 80% during use.


Depending on the degree of absorption of the surface, it is only 11-13 mm2 lt.

Storage duration

Can be stored for 2 years where sunlight does not fall, in original packaging without opening the lid, with freezing protection.

 Drying time

First drying – 1 hour

Complete drying – 24 hours

Security measures

Protect your eye and body from falling. Keep out of reach for children.

Technical features

Colour– White

The product structure – acrylic copolymer based

Solid content – 72-74%

Density – 1,60 kg / liter

Complete drying period – after 24 hours

Packaging – 3.5; 10.0 and 25.0 kg buckets

Adhesiveness: 120 KU-125 KU at 25 ° C

PH : 8-9


Back To Top